crucianelli
Index: Early solidbodies / 1963 no-name 40-V red

Old peghead with new pickups once more, and the newly re-introduced zero-fret. This one teams up now with a new nut, a more sensible and narrower one, generally made of some stratified yellow-brownish material. Crucianelli will use it for nearly all its guitars till the end of the decade.

No Crucianelli made before 1965 had an inlaid logo, so that any brandname could thus be glued onto body or headstock even at the last moment, depending of the distributor to serve. Logo is therefore often missing, as is the case here. The original name could have been Elite as well as Tonemaster, this specific configuration has been seen under both brands.

Finding a case where an early Crucianelli can fit in is not easy due to the generous dimensions: 1060 mm in overall length, 350 mm at lower bout. This is 3“ more than a Stratocaster in length and one inch more in width. Most generic rectangular cases are too small. Even standard gigbags are sometimes too short. A form-fit case for 335 style accepts an Eko 500 but not a Crucianelli (waist and shoulders too broad). The extra-large case shown on the pics looks like (and probably is) a generic one made in the 70’s for excentric guitars such as Flying V or Explorer.

Jack Marchal

Paletta vecchia e pickups nuovi, con il tasto zero appena re-introdotto. Questo è associato a un capotasto ormai più razionale e più stretto, fatto generalmente di qualche materiale plastico giallo-brunastro. Sarà montato su tutte le Crucianelli, o quasi, per il resto del decennio.

Prima del 1965 nessuna Crucianelli aveva un logo intarsiato. Cosi si poteva incollare qualche marchio sul corpo o la paletta anche all’ultimo momento, a secondo del distributore da servire. Spesso si è perso il logo, come in questo caso. Il nome originale avrebbe potuto essere Elite o Tonemaster, questa configurazione specifica esiste sotto entrambi i brand.

Trovare una custodia rigida capace di ospitare una vecchia Crucianelli è un'impresa disperata, viste le dimensioni generose: lunghezza 1060 mm e larghezza massima 350. Cioè 75 mm di più di una Stratocaster in lunghezza e 27 mm di più in larghezza. Salvo eccezioni, le custodie quadrangolari generiche sono troppo piccole. Neanche certe custodie morbide standard sono sufficienti. Una custodia rigida per il tipo 335 ospita una Eko 500 ma non una Crucianelli a causa delle spalle troppo larghe. La custodia XL mostrata in foto assomiglia a (e probabilmente è) un modello generico fatto negli anni settanta per Flying V, Explorer e chitarre fuori misura di quel tipo.

Jack Marchal

 
(c) 2002-2008 Fetishguitars.com - All rights reserved      How to contact us.